★ 4.9 on Google · 200+ reviews

Mold remediation · Federal Way, WA

Federal Way mold remediation in attics and crawl spaces

Most attic mold in Federal Way homes comes from blocked soffit vents and bath fans with nowhere to go. We clean it up and fix the airflow.

  • Uncover soffit vents buried under blown-in insulation
  • Check sheathing above bathrooms and along the eaves
  • Contain, HEPA vacuum and treat affected framing
★★★★★Google reviews4.9 Kirkland · 5.0 Renton
BBB rating A+View profile
Puget Sound Energy Recommended Energy Professional
Removing mold from attic roof sheathingMold remediation for Federal Way homes
  • Free inspectionWith photos of everything we find
  • Licensed, bonded, insuredWashington # ATTICSI795QZ
  • Family-run and localKirkland and Renton offices
  • 4.9 to 5.0 on GoogleKirkland 4.9 · Renton 5.0

Federal Way homes

Mold remediation built around Federal Way houses

Here is the pattern we see in Federal Way attics again and again. Blown-in fiberglass was piled right to the edge of the roof, covering the soffit vents. Over the years, more insulation was added on top, sealing them off completely. Without air coming in at the eaves, the attic cannot dry out. Bath fans hose moisture into the space every morning, and warm air leaks up around ceiling lights. All winter, that moisture condenses on the underside of the roof deck. By the time a roofer or inspector notices, the sheathing above the bathrooms and along the eaves is black.

We fix both the mold and the conditions behind it. The work area is contained, moldy insulation is vacuumed out, and the sheathing and rafters are cleaned with HEPA vacuums and treated with an antimicrobial. Then we restore airflow: baffles at every eave so soffit vents stay open, bath fans connected to exterior caps, and air sealing at the ceiling plane. If the roof lacks enough exhaust ventilation, we tell you. In crawl spaces, the cause is usually bare soil or a failed vapor barrier, and that gets corrected as part of the job. You get before and after photos of every treated area.

  • Uncover soffit vents buried under blown-in insulation
  • Check sheathing above bathrooms and along the eaves
  • Contain, HEPA vacuum and treat affected framing
  • Restore airflow with baffles and sealed fan ducts
Home in Federal Way, Washington
FIG. 01Home in Federal Way, Washington

Local conditions

What Federal Way throws at attics and crawl spaces

The houses

Most of Federal Way was built after 1960, as subdivisions spread out from Pacific Highway and I-5. Marine Hills and the Dash Point area have 1960s and 1970s view homes on sloped lots, often with daylight basements. Twin Lakes, Lakota and Steel Lake are full of 1970s and 1980s split-levels, ramblers and two-stories over crawl spaces, with truss attics and blown-in fiberglass. West Campus adds 1990s and 2000s homes with vaulted ceilings and tighter attic spaces. Many of these houses are now on their first or second set of original insulation and ducts.

The weather

Federal Way sits on a plateau between Puget Sound and the Green River valley, with Poverty Bay and Dash Point on its western edge. The city is dotted with small lakes and wetlands, including Steel Lake, Mirror Lake and the West Hylebos. Tall Douglas firs shade many lots. Rain arrives in long gray stretches from fall through spring, and low spots near lakes and wetlands stay damp for weeks.

The wildlife

Greenbelts, wetlands and wooded ravines run through Federal Way subdivisions, giving rats and mice cover close to houses. Roof rats use fir branches and fence lines to reach rooflines. Norway rats burrow near lakes, creeks and drainage ponds. Squirrels and raccoons from the West Hylebos and the old Weyerhaeuser campus woods regularly test attic vents and roof edges.

Typical results

What mold remediation looks like

After: sheathing cleaned and the bath fan vented outsideBefore: mold on attic sheathing from a loose bath fan ductBeforeAfter
Before / after. After: sheathing cleaned and the bath fan vented outside · Kirkland, WA

FAQ

Mold remediation in Federal Way: FAQ

Still unsure? Call (800) 674-4933 and talk it through with us.

Can I just spray the attic mold myself?

Spraying may lighten the stains, but it does not remove the growth or fix the moisture feeding it. In most Federal Way attics, the cause is blocked soffit vents or a bath fan venting into the attic. Unless those are corrected, the mold returns the next wet season. We find and fix the cause along with the cleanup.

Will mold in my attic affect a home sale?

It often shows up on a buyer's inspection report and can lead to repair requests. Having it remediated, with the cause corrected and photos documenting the work, gives you a clear record to share. We can inspect before you list so you know what is in the attic.

Free mold remediation inspection in Federal Way.

Book a free inspection. We'll photograph your attic and crawl space and walk you through what we find, before you decide anything.

CallFree estimate

Request received

Thank you. We've got it.

We'll call you to book your free inspection.

  1. 01We call to set a time that works for you.
  2. 02We inspect and photograph your attic and crawl space.
  3. 03You get a clear written estimate. No obligation.

Urgent? Call (800) 674-4933